We need to move pcbs with ESD sensitive components on from an EPA to another EPA passing through a non-EPA area. What is the recommend method for tranporting these devices to minimise ESD damage? We don't want to use individual shielding bags.
There is no single recommended method or packaging type. However I reccommend the packaging used has the following characteristics:
1) no part of the packaging should be an exposed insulating materila which could charge up and cause ESD risk in an EPA.
2) the material in contact with the ESD sensitive parts should be dissipative
3) there should be a surrounding conductive material to form an electrostatic field shield
4) an air gap, dissipative material or other barrier should prevent ESD currents being conducted from the outside of the packaging to the ESD sensitive parts.
A shielding bag has all these characteristics, but it is quite possible to design a larger packaging system to contain many items that achieves the same using different packaging materials.